Playing The Video - Panasonic PT-VW345NZ Operating Instructions Manual

3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Note
f The panel resolution is less than the picture, it will be enlarged when maintaining the aspect ratio.
f The panel resolution is more than the picture, it will be reduced when maintaining the aspect ratio.

Playing the video

Playing on the full screen (Video)
When [AUTOPLAY] is set to [OFF]
It will play a video file every time.
1) Press asqw to select a file.
2) Press the <ENTER> button.
f Playing on the full screen.
f Press the <ENTER> button to pause the video playing. Press the button again to play the video at the position of pause.
f Press qw to forward or backward during playing the video. You can select the speed of three stage according to the
numbers which you pressed qw.
f During playing the video, press a to play the video from the beginning. (Play from the beginning)
f During pausing the video play, press q to select the previous video file, press w to select the next video file.
3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Note
f When [AUTOPLAY] is set to [OFF], the resume play (pausing the video to play anther video/picture, or to return from
the thumbnail/folder list) will be enabled. The position of resume play will be reset when switch the [Miracast(TM)] and
[Panasonic APPLICATION] input, the AC power cord is cut off or the USB memory is removed.
When [AUTOPLAY] is set to [ON]
All video files in the same folder will play automatically.
1) Press asqw to select a file.
2) Press the <ENTER> button.
f Playing on the full screen.
f Press the <ENTER> button to pause the video playing. Press the button again to play the video at the position of pause.
f Press qw to forward or backward during playing the video. You can select the speed of three stage according to the
numbers which you pressed qw.
f During playing the video, press a to play the video from the beginning. (Play from the beginning)
f During pausing the video play, press q to select the previous video file, press w to select the next video file.
3) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
f Return to the thumbnail or folder list screen.
Termination of the memory viewer
1) When terminate the memory viewer, remove the USB memory directly.
112 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Forward/Backward/
Pause
Timer bar
Guide display