Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to "Read this first!" (
Attaching
1)
Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing
1)
Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2)
Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the
side tabs.
40 - ENGLISH
Chapter 3 Basic Operations - Powering on/off
Æ
page 7).