Using The P-Timer Function; Using The Mute Function - Panasonic PT-VW345NZ Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control

Using the P-TIMER function

You can operate the P-TIMER function.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
button
1) Press the <P-TIMER> button on the remote control.
f The count is started.
f The elapsed time or the remaining time is displayed at the bottom right of the projected image.
2) Press the <P-TIMER> button again.
f The count is stopped.
3) Press the <P-TIMER> button again.
f The count is resumed.
Note
f Pressing the button for at least 3 seconds to release the P-TIMER function.
f For details, please refer to the [DISPLAY OPTION] menu → [P-TIMER] (

Using the MUTE function

This button allows you to turn off the audio output temporarily.
button
1) Press the <MUTE> button on the remote control.
f The audio turns off.
2) Press the <MUTE> button again.
f The audio turns on.
52 - ENGLISH
Æ
page 72).