Controlling The Volume Of The Speaker; Using The Function Button; Switching The Input Signal - Panasonic PT-VW345NZ Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control

Controlling the volume of the speaker

You can control the volume of the projector's speaker or audio output.
1) Press the <VOL -> or <VOL +> button on the remote control.
f You can also press qw on the control panel.
<VOL ->
<VOL +>

Using the FUNCTION button

Some operations in the menu can be assigned to the <FUNCTION> button on the remote control so that it can be used as an
easy shortcut button.
button
1) Press the <FUNCTION> button on the remote control.
To assign functions to the <FUNCTION> button
1) Press the <MENU> button on the control panel or the remote control to display the menu items (main
menu, sub menu, or details menu) you want to assign.
f Refer to "Navigating through the menu" (
2) Press and hold the <FUNCTION> button for 3 seconds or more.
Note
f After settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in
[ASSIGNED FUNCTION] of the operation guide under the menu.
f Perform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (

Switching the input signal

You can switch the input signals to project.
1) Press <COMPUTER 1>, <COMPUTER 2>, <HDMI> or <VIDEO/S-VIDEO> button on the remote control.
f You can also press the <INPUT SELECT> button on the control panel.
<COMPUTER 1>
<COMPUTER 2>
<HDMI >
<VIDEO/S-VIDEO>
48 - ENGLISH
buttons
Decreases the volume.
Increases the volume.
Æ
page 54) for the operation of the on-screen menu.
buttons
Switch to COMPUTER1 input.
Switch to COMPUTER2 input.
Switch to HDMI input.
Switch to VIDEO or S-VIDEO input.
Æ
page 78) when deallocating functions.