[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
4)
Press the <ENTER> button.
[FUNCTION BUTTON]
The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the assigned
setting.
Releasing assigned function to the <FUNCTION> button
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3)
Select [DISABLE], then press the <ENTER> button.
4)
When the confirmation message is displayed, select [OK] and press the <ENTER> button.
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main
menu, submenu, or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.
[AUDIO SETTING]
You can perform more detailed setting for Audio.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Setting the mute
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [MUTE].
4)
Press qw to switch the item.
[ON]
[OFF]
Setting the audio output during standby
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3)
Press as to select [IN STANDBY MODE].
4)
Press qw to switch [IN STANDBY MODE].
f The items will switch each time you press the button.
78 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Adjustment
Turns up the volume.
Turns down the volume.
Turns off the volume temporarily.
Output the audio.
Range
0 ~ 63