Chapter 3 Basic Operations - Basic operations by using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1)
Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2)
Press the <AV MUTE> button again.
f The audio and image turn on.
Note
f When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P IN P function
(Only for PT-VW345NZ)
Two images can be projected simultaneously in form of projection mode (a small sub screen in the main screen [P IN P]/a
small sub screen side by side with the main screen [SIDE BY SIDE]).
button
1)
Press the <P IN P> button on the remote control.
f Press this button to switch the mode ([P IN P]/[SIDE BY SIDE]).
INPUT A
Note
f For details, refer to [P IN P] (
Switch the input source
You can switch the input source of the main screen and sub screen while the P IN P function is operating.
r Switch the input source of the main screen
Switch the input source as the same operation as the single screen.
r Switch the input source of the sub screen
When two screens are displayed (when no menu is displayed), press the <ENTER> button, the red frame of the
sub screen will be displayed. Switch the input source as the same operation as the single screen.
Press the <ENTER> button again, the red frame of the sub screen will disappear and then return to switch the
input source of the main screen.
Main screen
INPUT A
Æ
page 73).
Main screen
INPUT A
INPUT B
Sub screen
INPUT B
Sub screen
ENGLISH - 51