Table of Contents
Advertisement
ic Operation
Powering ON/OFF
Connecting the power cord
Be sure to insert the attached power cord securely to its base to prevent it from coming off.
Power cord holder
J
A power cord holder is designed to prevent the AC power cord from coming off the projector.
Please insert the power cord into the power cord holder correctly as Picture (1) shown:
AC Power cord holder
Attaching
J
Attach the AC power cord with the power cord clamp to the projector by following these steps.
1 )
Plug the power cord with the power cord holder to the projector as Picture (2) shown.
2 )
Push the clamp at the AC Power cord holder downward to secure it to the projector. It is correctly attached
until you hear the "CLICK" sound. See Picture (3) for correct attachment.
Clamp
Picture (1)
Picture (2)
Bottom View
Picture (3)
ENGLISH -
25
Advertisement
Table of Contents
