Table of Contents
Advertisement
Preparation
Start-up display
The LANGUAGE and INITIAL SETTING
after it has been initialized. (
Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings.
NOTE:
projector body to make the menu screen clearer.
For details, see POSITION THE IMAGE. (
LANGUAGE
1
To select the desired language.
INITIAL SETTING
PLEASE SELECT LANGUAGE.
SELECT
2
To proceed to INITIAL SETTING
ENTER
menu.
12
ENGLISH
page 41)
page 24)
ENTER
INITIAL SETTING
1
To select the desired menu.
INSTALLATION
HIGH ALTITUDE MODE
2
To change the settings in the
menu.
INITIAL SETTING
INSTALLATION
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft).
RETURN
SELECT
ENTER
INSTALLATION (
page 17, 39)
FRONT/
from the front
DESK
FRONT/
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
CEILING
project from the front
REAR/
from the rear (a translucent screen is
DESK
required)
REAR/
Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
CEILING
project from the rear (a translucent
screen is required)
HIGH ALTITUDE MODE (
Use in normal environment
OFF
(below 1 400 m (4 593 ft) above sea
level)
ON
Use at high altitude
(at 1 400 - 2 700 m (4 593 - 8 858 ft)
above sea level)
3
ENTER
NOTE:
LANGUAGE
To return to
INITIAL SETTING
menu.
(
page 13) on the top of the
FRONT/DESK
OFF
page 9, 39)
[RETURN]
menu, press
in
Advertisement
Table of Contents
