Ccd Board And Mic - Toshiba Satellite M205 Maintenance Manual

4.17 LCD Module

4.17 CCD Board and MIC

Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-32.
1. Disconnect the CCD cable from the CCD module connector and remove the CCD
board.
MIC
2. Lift the MIC from the display rear cover.
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
CCD board
Figure 4-32 Removing the CCD board and MIC
4 Replacement Procedures
CCD board cable
Maintenance Manual 4-55