4.19 LCD Module
4.20
CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-32.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
3. Lift the MIC from the display rear cover.
Satellite/E200/E205
Downloaded from LpManual.com Manuals
CCD module
Display rear cover
Figure 4-32 Removing the CCD board and MIC
Maintenance Manual
4.20 CCD Board and MIC
MIC cable
CCD cable
4-53