Table of Contents
Advertisement
2.3 Power Supply
DC IN LED
DC IN LED
On in Blue
Off
Off
If the DC IN LED off, follow the steps below:
1. Remove the battery pack and the AC adapter to shut off power supply to the
computer.
2. Attach the battery and AC adapter back again.
If the LED still off, follow the steps below:
Check 1
Make sure the DC IN LED goes on in Blue. If it does not, go to Procedure 2.
Check 2
Make sure the Battery LED goes on in Amber or Blue. If it does not, go to
Procedure 3.
Satellite M200/M205 /Satellite Pro M200 Maintenance Manual
Power supply status
DC power being supplied (from the AC adapter)
Battery damage and can't charge during DC-in.
Else
2 Troubleshooting
2-7
Advertisement
Chapters
Table of Contents
