4.19 LCD Module
4.20
CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-32.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
Figure 4-32 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
Satellite/E200/E205
Maintenance Manual
CCD module
Display rear cover
4.20 CCD Board and MIC
MIC cable
CCD cable
4-53