Toshiba Satellite M205 Maintenance Manual page 188

4 Replacement Procedures
Installing the Touch Pad and Button Board
Install the touch pad and button board according to the following procedures and Figure 4-33.
1. Seat the touch pad, button board touch pad bracket in the correct position and secure
it with the six M2.5x3 white flat head screws.
2. Connect the button board flat cable to CN2000 on the button board.
3. Connect the touch pad flat cables to JP1 on the touch pad.
4-58
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
4.18 Touch Pad, Button Board and Finger print board
Maintenance Manual