Toshiba Satellite M205 Maintenance Manual page 146

Hide thumbs Also See for Satellite M205:
Table of Contents

Advertisement

4 Replacement Procedures
4. Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
5. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4
black flat head screws with M3x4 black head screws.
6. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
CAUTION: Do not apply pressure to the top or bottom of the drive.
4-16
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
M3x4 black
flat head screw
Figure 4-6 Removing the HDD chassis
HDD Chassis
M3x4 black
flat head screw
HDD
4.2 HDD
Maintenance Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite m200Satellite pro m200

Table of Contents