4 Replacement Procedures
4.10 USB and CRT Cable, and Bluetooth Card
Removing the USB and CRT Cable, and Bluetooth Card
Remove the USB board, CRT Cable and bluetooth board according to the following
procedures and Figures 4-19.
1. Disconnect USB two cables from CN5 and CN4 on the system board.
2. Remove two M2x2 black flat head screws securing the USB board.
3. Remove the USB board and CRT from base enclosure.
4. Remove one M2x1 black flat head screws securing the Bluetooth Card.
5. Remove Bluetooth Card flat cable from CN16 on the system board.
6. Remove the Bluetooth Card from base enclosure.
4-36
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
CN4
CN16
Blue tooth card flat cable
Figure 4-19 Removing the USB and CRT cable, blutooth card
4.10 USB and CRT Cable, and Bluetooth card
CN3001
CN3000
M2x1 black flat head screw
Blue tooth card
M2x3 black flat head screw
USB board and RTC
BRKT
CN5
Maintenance Manual