Toshiba Satellite M205 Maintenance Manual page 161

4.7 Display Assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Place the display panel in the correct position and push the wireless antenna cable
into the top cover.
2. Connect the LCD/FL cable to CN7 on the system board.
3. Secure the display assembly with four M2.5x4 black flat head screws.
4. Close the display panel and turn the computer so the back is facing you and secure
two M2.5x2 black flat head screws.
Satellite MA200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
4 Replacement Procedures
Maintenance Manual 4-31