4 Replacement Procedures
4.16 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-35.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
CCD board
Figure 4-35 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
4-52
CCD board cable
MIC
Satellite / Satellite Pro L510 /L515 /L517 Maintenance Manual
4.16 CCD Board and MIC