4 Replacement Procedures
4.15 FL Inverter Board
Removing the FL Inverter Board
Remove the FL inverter board according to the following procedures and Figures 4-29.
1. Remove one M2.5x2 black flat head screw.
2. Lift the LCD module, FL inverter board and disconnect the LCD/FL cable from the
LCD/FL connector.
3. Disconnect the HV cable from the HV connector and remove the FL inverter board.
4-50
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
FL inverter board
/
LCD FL cable
Figure 4-29 Removing the FL inverter board
4.15 FL Inverter Board
M2x1 black flat head screw
FL inverter board BRKT
Maintenance Manual
HV cable