Fan; Figure; Removing The Fan - Toshiba TECRA S4 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA S4:

Table of Contents

4.19 Fan

To remove the fan, follow the steps below and refer to Figure 4-29.

1. Peel off the glass tape.

2. Disconnect the fan cable from the connector CN8770 on the system board.

3. Remove the following screws and fan.

M2.5×4B FLAT HEAD

TECRA S3 Maintenance Manual (960-532)

FLAT HEAD screw

Figure 4-29 Removing the fan

4 Replacement Procedures

M2.5×4B FLAT HEAD

[CONFIDENTIAL]

Table of Contents