Figure - Toshiba TECRA S4 Maintenance Manual

4 Replacement Procedures
Installing the Fan
To install the Fan, follow the steps below and refer to Figure 4-29.
1. Install the fan and secure it with the following screws.
• M2.5×4B
2. Connect the fan cable to the connector CN8770 on the system board.
3. Stick the glass tape in place.
CAUTION: When sticking the glass tape, do not let the tape over the CPU heat sink.
4-46
FLAT HEAD screw
[CONFIDENTIAL]
×2
TECRA S3 Maintenance Manual (960-532)
4.19 Fan