Modem Test - Toshiba TECRA S4 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA S4:

Table of Contents

3 Tests and Diagnostics

Modem test

For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the

dedicated "FAT-MODE inspection device (product code: QE2000P01 made by Nitto Electric

Manufacture Co.Ltd)" for the tests.

To execute Modem test, press 2 and Enter. Following message will appear.

[Modem loopback test !]

ICHx MDC Test Program with Modem Sound (Line Test)

* Scorpio Modem Initialize

* Digital Loopback Test

* RJ11 Connector Check (LED)

NOTE: The menu displayed by your computer may be slightly different from the one

shown above.

RJ11 Connection Check (LED) (Operator's Check LED) test will be executed, and the

following message will appear.

...Press Key (Y = OK , N =NG)

If the color in the LED of the connection checker is orange, press Y, otherwise, press N.

3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program

[CONFIDENTIAL]

:(Operator's Check!!)

TECRA S3 Maintenance Manual (960-532)

Table of Contents