Installing The Bluetooth Module - Toshiba TECRA S4 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA S4:

Table of Contents

4 Replacement Procedures

Installing the Bluetooth module

To install the Bluetooth module, follow the steps below and refer to Figure 4-16.

1. Connect the Bluetooth cable to the connector on the Bluetooth module and set the

Bluetooth module to the slot in place.

2. Connect the Bluetooth cable to the connector CN4400 on the system board.

3. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.

[CONFIDENTIAL]

4.11 Bluetooth module

TECRA S3 Maintenance Manual (960-532)

Table of Contents