Check Of The Raid Configuration; Explanation Of The Screen Display - Toshiba TECRA S4 Maintenance Manual

3.3 Check of the RAID configuration

3.3 Check of the RAID configuration
Following screen is displayed for checking the RAID configuration and specifying a failed
drive.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-1
Write cache
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 LD0-1 FAILED
< RAID : not OPTIMAL >

3.3.1 Explanation of the screen display

Contents of the screen display are shown below.
Level
LD0 RAID-1
Write cache
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 LD0-1 FAILED
< RAID : not OPTIMAL >
RAID level
TECRA S3 Maintenance Manual (960-532)
Status
DEGRADE xxGB
: Enable
: Disable
: Enable
Size
xxGB
xxGB
Status Capacity
DEGRADE xxGB
: Enable
: Disable
: Enable
Size
xxGB
xxGB
Capacity
Model
FUJITSU--------------
FUJITSU--------------
Model
FUJITSU--------------
FUJITSU--------------
Physical Drive
information
[CONFIDENTIAL]
3 Tests and Diagnostics
Rev xx.xx.xxxx
Rev
xxxxxxx
xxxxxxx
Logical Drive
information
Rev
xxxxxxx
xxxxxxx
3-9