Replacing The 15.0-Inch Xga Samsung Fluorescent Lamp - Toshiba TECRA S4 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA S4:

Table of Contents

4 Replacement Procedure

4.30.3 Replacing the 15.0-inch XGA Samsung Fluorescent Lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid

contaminating or damaging the LCD panel. Be careful not to let dust or

other foreign substance into the module.

Disassembling the 15.0-inch XGA Samsung Fluorescent Lamp

To disassemble the 15.0-inch XGA Samsung fluorescent lamp, follow the steps below and

refer to Figure 4-88 to 4-91.

1. Remove the PCB.

CAUTION: Handle with care not to damage the COF of S/D and G/D ICs.

Figure 4-88 Replacing Samsung fluorescent lamp (XGA) (1)

[CONFIDENTIAL]

TECRA S3 Maintenance Manual (960-532)

4.30 Fluorescent Lamp

Table of Contents