Bluetooth Module - Toshiba TECRA S4 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA S4:

Table of Contents

4.11 Bluetooth module

Removing the Bluetooth module

To remove the Bluetooth module, follow the steps below and refer to Figure 4-16.

1. Disconnect the Bluetooth antenna cable from the connector on the Bluetooth

2. Disconnect the Bluetooth cable from the connector CN4400 on the system board.

3. Remove the Bluetooth module from the slot and disconnect the Bluetooth cable

from the connector on the Bluetooth module.

TECRA S3 Maintenance Manual (960-532)

Bluetooth antenna cable

Bluetooth module

Figure 4-16 Removing the Bluetooth module

4 Replacement Procedures

Bluetooth cable

[CONFIDENTIAL]

Table of Contents