Table of Contents
Advertisement
3 Tests and Diagnostics
3
Tests and Diagnostics
3.30 Sound Test program
This section describes how to perform the Sound test. To execute the sound test, refer to the
following description.
Insert the test program disk for Sound test in the floppy disk drive and turn on the power. The
following message will appear:
###############################################################
######
WSS, Sound blaster pro Diagnostics program
###############################################################
*
*
1 ............
*
*
2 ............
*
*
3 ............
*
*
4 ............
*
*
---It outputs at the speaker and lineout---
*
***************************************************************
.... Press test number[1-4] ?
Input the test number and press Enter.
3.30.1 Sound (Standard) test
To execute the Sound (Standard) test, press 1 and Enter. The following menu will appear in
the display.
#################################################################
######
#################################################################
*
*
1 ............ ( Microphone recording & play )
*
2 ............ ( Sine wave )
*
3 ............ ( Line IN recording & play )
*
*
9 ............
*
*****************************************************************
.... Press test number[1-3,9] ?
To return to the Sound test menu, Press 9 and Enter. Then following message will appear in
the display.
3-94
Sound (Standard)
Sound (Legacy)
CD Sound (Standard)
CD Sound (Legacy)
ICH4-M + AD1981A
Exit to Main
[CONFIDENTIAL]
Diagnostics program
TECRA S3 Maintenance Manual (960-532)
3.30 Sound Test program
######
######
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Advertisement
Chapters
Table of Contents
Troubleshooting
