Updating Software - Invacare Mirage Service Manual

1.1

Updating software

Invacare is continuously carrying out further development and improvements to drive programs for
electric mobility products. For this reason, you should always check whether the drive program
version number is up-to-date when carrying out any repairs or regular maintenance. If a newer
version is available, the drive program must be updated. The procedure for updating the drive
program is described in the wizard software operating manual.
Note:
If you have carried out customer-specific modifications to the drive program, you will have to
make these changes again after installing the new drive program.
CAUTION: any changes to the drive program can affect the driving characteristics and the
tipping stability of the vehicle!
• Changes to the drive program may only be carried out by trained Invacare® specialist
dealers!
• Invacare® can only give a warranty for safe vehicle driving behaviour - especially the tipping
stability - for unaltered standard drive program!
Requirements:
• Dynamic® Wizard software
• Operating manual for Wizard software
• Further requirements, such as a minimum system configuration for the PC used for
programming, required programming cables etc. can be taken from the Wizard software
operating manual.