9
Chassis
7
6
Parts :
1
Anti Tipper
2
Anti Tipper Socket
3
Side Frame LH
4
Hanger Bracket
5
Control Module Bracket
6
Seat Saddle
7
Seat Clamp
8
X-Brace (Seat Frame)
9.1
Tools Required:
•
8mm Open Ended Spanner x 2
•
10mm Open Ended Spanner x 2
•
13mm Open Ended Spanner x 2
•
17mm Open Ended Spanner x 2
9.2
Inspection
1. Check all tubing for misalignment, damage or bending of the frame or crossbar assembly.
2. Check that no misalignment is present at the castor mount area (castor fork and socket).
3. Check all brazed/welded joints for fractures or damage. Check the paint finish for damage.
4. Check the crossbar assembly is not damaged (pivot bolt should not be over-tightened).
5. Check that the chair folds easily and that the crossbar pivots and folding mechanisms operate
correctly.
16
5
13
4
10
8
11
12
9
Battery Rail
10
Rear Tie Down Clamp
11
Seat Stay
12
Plastic Side Frame Fittings
13
Side Frame RH
14
U Bracket
15
Handwheel
16
Backrest Insert
•
4mm Hex Wrench
•
5mm Hex Wrench
•
Flat Bladed Screwdriver
•
Mallet
9
16
15
3
14
2
1