4. To detach the gearbox from the motor, degrease the gearbox, remove the four fixing screws
with an 8mm spanner, taking care not to deface or damage any gear teeth. Separate the
gearbox and motor assembly.
11.4
Assembly
1. To reassemble reverse steps 2 to 5 ensuring correct motor to gearbox alignment is achieved.
2. Replace both gaskets (6 and 7) and re-pack the gearbox with 'Shell Albida' Grease (approx.
200g)
Note:
•
To aid assembly it may be necessary to hold the gearbox housing (2) or gearbox top (1) in a
vice. Take care not to damage the parts.
21