Invacare Mirage Service Manual page 34

7 Shark Control Unit
Fault
8 Power Module Fault
9 Shark Communications
Fault
10 Unknown Fault
11 Incompatible Control
Unit
For further details and in depth information refer to the Shark Installation Guide GBK80047
01 Right park brake output enabled when chair
idle
02 Right park brake output did not enable when
entering drive
03 Right park brake fault during power up test
04 Right park brake feedback low during drive
(park brake short circuit)
00 Local remote fault (electronics, power button
fault etc).
01 Joystick fault at remote
02 Speed pot fault at remote.
00 Power Module Fault
01 RAM fault
02 ROM fault
03 CPU fault
04 EEPROM fault
05 Watchdog fault
06 Stack fault
07 Software fault
08 Power up testing fault
09 Relay fault or Pre-charge fault
0A Bridge fault or Disable all fault
0B Electronics fault
0C Calibration settings fault
00 Loss of communications between remote and
power module
01 Limp mode due to unreliable communications
00 Catch all fault output
00 Wrong type of control unit connected.
33