Report Printing - Toshiba e-STUDIO25 Operator's Manual

Report Printing

Print a copy count report for each department by inputting the code number for the desired department
and then following this procedure.
A list of all department codes is printed out if the master code is used.
1 Press the key to enter the program menu.
2 Select "02.LISTS" and press the
3 Select "1.DEPARTMENT CODE" and press the
key.
• The DEPARTMENT CODE list is printed out as the following
message appears:
Printing accepted
• The copy count report is printed out for the department code
used to initiate this print procedure or all department codes
if the master code was used.
Tip
"3. SUPPLY ORDER" can be selected only when the optional
FAX board kit is installed.
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
LISTS
1.DEPARTMENT CODE
2.FUNCTION
3.SUPPLY ORDER
1
2
3
4
5
6
7
8
9
10
11
12
5-17