Adding Paper To The Large-Capacity Feeder (Optional); Adding Paper To The Large-Capacity Feeder (Option For E-Studio20/25) - Toshiba e-STUDIO25 Operator's Manual

2. LOADING PAPER (Cont.)

Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25)

1 Pulling up the grip, draw out the large-capacity
1
feeder carefully until it comes to a stop.
2
3
2 Open some paper packages, take out entire reams
of paper and set them aligned in tray
• When setting the paper, set the paper for
4
aside, and set it for
set neatly if you pile up the paper little by little alternately in
the tray
(Refer to the labels attached in the large-capacity feeder).
5
• Do not add paper above the line indicated on the guide.
• Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
• Paper starts being fed from the elevator tray
6
when it runs out of paper, the paper on tray
position
• Do not use creased, folded, wrinkled or damp sheets of pa-
per.
7
3
Close the cover of the large-capacity feeder.
• Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.
8
9
10
11
12
7-4
WHEN THE GRAPHIC SYMBOL FLASHES
to the left aside. (The paper can be
and .) Be sure that the centre lever is not open
.
and tray .
to the right
at first, and
moves to the
A
B