Toshiba e-STUDIO25 Operator's Manual page 18

Arrow Keys
Use these keys to select a desired setting option or to enter a desired name or value in the PROGRAM mode or
EDIT MENU.
PRINTER Key
Use this key to adjust the printer settings or perform printing automatically.
MAIN MENU Key
Press this key to switch from the PROGRAM mode to the COPY mode.
You can select the jobs that you would like to perform in COPY, FAX or PRINTER mode.
PROGRAM Key
Use this key to reset the settings of the copier or adjust the default settings.
INTERRUPT Key
Use this key to interrupt the copying job in process and to perform another copying job. You can resume the
interrupted copying job by pressing this key again.
SUPER ENERGY SAVER Key
Press this key if the copier is unused for a long time and the copier goes into the Super Energy Save Mode. Only the
lamp located to the left of the key illuminates. The Message Display and the other lamps turn off. Press this key
again to resume copying. After warming up, the copier becomes ready to copy.
FUNCTION CLEAR Key
You can clear all modes that you have selected and reset the settings to the defaults.
CLEAR/STOP Key
Press this key to clear the number of copies to make or to stop copying.
START Key
Press this key to start copying.
Numeric Keys
Use these keys to enter the number of copies that you would like to make.
SET Key
Use this key to accept the data that you have entered in the PROGRAM mode or EDIT MENU.
CANCEL Key
Use this key to return to a previous menu in the PROGRAM mode or EDIT MENU.
Automatic Function Clear Mode
Even if you do not press the
key, the automatic function clear mode
will clear all settings to defaults and
the basic screen will be displayed, 45
seconds after copying is finished or
after the last key is pressed. While the
department management function is
being operated, the display returns to
the department code input screen.
Page 5-3.
1
2
3
4
5
6
7
8
9
10
11
12
1-5