Toshiba e-STUDIO25 Operator's Manual page 73

7. ANNOTATION (Cont.)
When Placing the Original on the Glass
1
6 Place the original on the glass and press the
key.
2
3
• For the e-STUDIO16, when the automatic paper selection
4
(APS) mode or automatic magnification selection (AMS) is
selected, a message appears prompting you to specify the
size of the original that you would like to copy.
Use the
5
Then press the
document.
6
• When the first original has been scanned, the "Next
Original?" screen appears.
7 Select "YES," set the next original and press the
7
key.
• While the "Next Original?" screen is being shown, if the
8
the ANNOTAION is terminated. Select "YES" or "NO," and
press the
9
8 For the next and subsequent originals, repeat step
7 above.
10
9 When the last original is finished being scanned,
select "NO."
11
10
Press the
Tip
12
In the annotation function, printing is performed along the lead-
edge of the paper selected. This may be the top or the side of
copy depending upon the orientation of the copy paper.
Therefore, place the original with its top facing the paper output
side of the machine.
4-22
EDIT MENU
or key to specify the size of the original.
key. The copier will start scanning the
key is pressed, the scanned data is deleted, and
key.
key.
Select original size
LT
LD
LT-R
LG
ST-R
Next Original?
YES
NO
Memory clear?
YES
NO
Next Original?
YES
NO
1
3
3
3