Job Build - Toshiba e-STUDIO25 Operator's Manual

9. JOB BUILD

This function allows up to five originals to be scanned and stored separately and then to be copied and
output all at once.
1 Press the key on the control panel while in the
initial screen for copying. The "EDIT MENU" screen
appears.
2 Press the
Then press the
3 Press the key to display the "ON." Then press
the key.
4 The "JOB BUILD: ON" screen appears. Press the
key to return to the initial screen for copying.
5 Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
Note
To select the paper cassette, press the
and then select the desired paper cassette.
6 Place the original on the glass or feed tray and press
the key.
7 After the original is scanned, the screen on the right
appears.
• When scanning the next original without changing any
settings, place it on the glass or feed tray and select "Scan
next page." Then press the
• In scanning the next original, if the scan density and Edge
Erase settings are changed, select "Change current
settings" to change the settings. Then press the
• When all originals have been scanned, select "End job build"
to start copying automatically. Then press the
key to display the "JOB BUILD."
key.
key, select AMS
key.
READY
ANNOTATION
EDITING

JOB BUILD

JOB BUILD
OFF
ON
READY
ANNOTATION
EDITING
JOB BUILD
Scanning in memory
Scanning Page
JOB BUILD
Scan next page
End job build
Change current setting
key.
key.
1
:OFF
:OFF
:OFF
1
1
:OFF
:OFF
:ON
1
:XXX
1
4-25
1
2
3
4
5
6
7
8
9
10
11
12