Alternation - Toshiba e-STUDIO25 Operator's Manual

5. ALTERNATION

In this copying mode, as sets of copies are output, the sets are alternated - lengthwise and crosswise -
on top of each other. (Optional cassette or Stack Feed Bypass is required.) LT/LT-R paper only is available
in this mode. When the Finisher is attached, this mode cannot be selected.
When Using the Automatic Document Feeder (optional) or
the Reversing Automatic Document Feeder (optional)
1 Place the originals in the feeder.
2
Press the key. The "FINISHING" screen appears.
3 Select the "ALTERNATION" mode.
• Select "ALTERNATION" from the FINISHING menu by
pressing the
4
Key in the desired copy quantity using the numeric
keys.
5 Select the desired image density and reproduction
ratio.
6
Press the key.
• The copier starts copying. In this copying mode, as sets of
copies are output, the sets are alternated - lengthwise and
crosswise - on top of each other.
key. Then press the
READY
FINISHING: SORT
key.
1
SORT/OFFSET

ALTERNATION

1
2
3
4
5
6
7
8
9
10
11
12
6-7