Led Test - Toshiba e-STUDIO25 Operator's Manual

5. LED TEST

The LED test checks LED operation by lighting all the LEDs on the control panel.
1 Press the key to enter the program menu.
2 Select "05.TEST MODE" and press the
3 Select "02.INDIVIDUAL TEST" and press the
4
Select "03.LED TEST" and press the
5 Visually check that all the LEDs are on. After
checking, press
6 If all the LEDs turned on, select the "1.OK" and press
the key.
If even one LED did not light, select the "2.NG" and
press the key.
• The results of the LED test can be confirmed with the self
test report. Page 8-12
• If the result of the LED test is judged to be NG, call your
service representative.
key.
key.
key.
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
key.
INDIVIDUAL TEST
01.ADF TEST
02.KEY TEST
03.LED TEST
04.LCD TEST
05.SPEAKER TEST
06.SWITCH TEST
07.TEST PRINT
LED TEST
CHECK IF ALL LEDS ARE ON.
PRESS STOP TO COMPLETE.
LED TEST
ENTER TEST RESULT
1.OK
2.NG
1
2
3
4
5
6
7
8
9
10
11
12
8-7