Edge Erase Copying - Toshiba e-STUDIO25 Operator's Manual

4. EDGE ERASE COPYING

If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.
1
Using the edge erase mode, a white border will be created along the outside edges of the copy eliminating
the marks. The default edge erase margin is 10 mm, but you can select any margin within the range of 4
to 20 mm.
Example of Edge Erase Copying
2
3
4
1 Press the
initial screen for copying. The "EDIT MENU" screen
5
appears.
2
Press the
press the
6
3
Press the
7
Then press the
4 The current edge erase margin appears on the
8
screen. To change the edge erase margin, select
the desired margin by using the
Then press the
9
• The edge erase margin changes at increments of 1 mm.
5
The selected edge erase margin appears on the
10 screen. Press the
screen for copying.
6 Place the original(s) on the feed tray or on the glass.
11
7 Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
12
8
Press the
4-14
EDIT MENU
key on the control panel while in the
key to display "Edge Erase." Then
key.
key and select the "ON."
key.
key.
key to return to the initial
key.
READY
DUAL PAGE
IMAGE SHIFT
EDGE ERASE
EDGE ERASE
OFF
ON
EDGE ERASE
or key.
READY
DUAL PAGE
IMAGE SHIFT
EDGE ERASE
1
:OFF
:OFF
:OFF
1
1
20mm
10mm
4mm
1
:OFF
:OFF
:10mm