Department Codes - Toshiba e-STUDIO25 Operator's Manual

4. DEPARTMENT CODES

If the copier is set up so that department codes can be used, you can make copies only after entering a
pre-assigned department code.
1 When the department control function is in use, the
screen shown on the right appears immediately after
the power switch is turned on.
2 Enter the 5-digit department code, and press
• The department code is shown with asterisks (*****). When
a correct department code is entered, the following message
appears.
READY
• When a wrong department code is entered, the following
message appears. Enter the correct department code.
Invalid DEPARTMENT CODE
3
Make copies, as you would normally.
• When you have finished making copies, either press the
key twice, or wait 45 seconds.
Enter DEPARTMENT CODE
PAPER :APS
FINISHING :SORT
key.
READY
PAPER :APS
FINISHING :SORT
Invalid DEPARTMENT CODE
PAPER :APS
FINISHING :SORT
Enter DEPARTMENT CODE
PAPER :APS
FINISHING :SORT
1
2
1
:AUTO
ZOOM :100%
EDIT
3
1
:AUTO
ZOOM :100%
EDIT
4
5
1
:AUTO
ZOOM :100%
6
EDIT
1
:AUTO
7
ZOOM :100%
EDIT
8
9
10
11
12
1-13