Toshiba e-STUDIO25 Operator's Manual page 68

When Placing the Original on the Glass
1
Follow step 2 to 8 of "When Using The Automatic
Document Feeder."
2 Place the original on the glass and press the
key.
• For the e-STUDIO16, a message appears prompting you to
specify the size of the original that you would like to copy.
Use the or
Then press the
document.
• When the first original has been scanned, the "Next
Original?" screen appears.
3 Select "YES," set the next original and press the
key.
• While the "Next Original?" screen is being shown, if the
key is pressed, the scanned data is deleted and 2-
in-1/4-in-1 copying is terminated. Select "YES" or "NO" and
press the key.
4 For the next and subsequent originals, repeat step
3 above.
5
When scanning of the last original has finished,
select "NO."
6
Press the key.
Page 4-15
key to specify the size of the original.
key. The copier will start scanning the
Select original size
LT
LD
LT-R
LG
ST-R
Next Original?
YES
NO
Memory clear?
YES
NO
Next Original?
YES
NO
1
2
1
3
4
5
3
6
3
7
8
3
9
10
11
12
4-17