Paper Type - Toshiba e-STUDIO25 Operator's Manual

11. PAPER TYPE

You can select special paper for copying. This special paper is fed from the stack feed bypass.
1
Note
Place only one sheet of this special paper on the bypass at one time.
2
3
1 Press the
initial screen for copying. The "EDIT MENU" screen
appears.
4
2 Press the
5
3 Press the
6
4 Use the
PAPER" or "TRANSPARENCY." The selected sheet
7
is displayed. Press the
5 The selected paper type appears. Press the
8
to return to the initial screen for copying.
6 Refer to the procedures described in "Bypass
9
Copying (
Specifying the Copy Size (
a copy.
10
Selection of Thick paper or Transparency mentioned above applies only to the preceeding copying jobs.
11
12
4-28
EDIT MENU
How to Select Special Sheets
key on the control panel while in the
key to display the "PAPER TYPE. "
key.
or key and select "THICK
key to accept the sheet.
Page 3-4)" or "Bypass Copying by
Page 3-6)." Then make
READY
JOB BUILD :OFF
JOB MEMORY

PAPER TYPE

:OFF
PAPER TYPE
OFF
TRANSPARENCY
THICK PAPER
PAPER TYPE
OFF
TRANSPARENCY
THICK PAPER
key
READY
MIX SIZE :OFF
JOB MEMORY
PAPER TYPE :TRANSPARENCY
1
1
1
1