Configuring The User Lockout Duration Time - Alcatel-Lucent OmniSwitch 6250 Management Manual

Managing Switch User Accounts

Configuring the User Lockout Duration Time

The user lockout duration time specifies the number of minutes a user account remains locked until it is
automatically unlocked by the switch. This period of time starts when the user account is locked out of the
switch. At any point during the lockout duration time, the admin user can still manually unlock the user
account.
By default, the user lockout duration time is set to 0; this means that there is no automatic unlocking of a
user account by the switch. The locked user account remains locked until it is manually unlocked by the
admin user. To configure a lockout duration time, use the
-> user lockout-duration 60
Do not configure a lockout duration time that is less than the lockout window time period (see
ing the User Lockout Window" on page
OmniSwitch 6250/6450 Switch Management Guide
user lockout-duration
9-23).
May 2012
Configuring Global User Lockout Settings
command. For example:
"Configur-
page 9-25