Configuring The User Lockout Duration Time; Manually Locking And Unlocking User Accounts - Alcatel-Lucent OmniSwitch 6850-48 Management Manual

Configuring Global User Lockout Settings
By default, the lockout threshold number is set to 0; this means that there is no limit to the number of
failed login attempts allowed, even if a lockout window time period exists. To configure a lockout thresh-
old number, use the
-> user lockout-threshold 3
Note that a locked user account is automatically unlocked when the lockout duration time (see
ing the User Lockout Duration Time" on page
user account.

Configuring the User Lockout Duration Time

The user lockout duration time specifies the number of minutes a user account remains locked until it is
automatically unlocked by the switch. This period of time starts when the user account is locked out of the
switch. Note that at any point during the lockout duration time, the admin user can still manually unlock
the user account.
By default, the user lockout duration time is set to 0; this means that there is no automatic unlocking of a
user account by the switch. The locked user account remains locked until it is manually unlocked by the
admin user. To configure a lockout duration time, use the
-> user lockout-duration 60
Do not configure a lockout duration time that is less than the lockout window time period (see
ing the User Lockout Window" on page

Manually Locking and Unlocking User Accounts

The user lockout unlock
only available to the admin user or a user who has read/write access privileges to the switch.
To lock a user account, enter user lockout and the username for the account. For example,
-> user lockout j_smith
To unlock a user account, enter user unlock and the username for the locked account. For example,
-> user unlock j_smith
In addition to this command, the admin user or users with read/write access privileges can change the user
account password to unlock the account.
Note that if a lockout duration time (see
not configured for the switch, then it is only possible to manually unlock a user account with the user
lockout command or by changing the user password.
page 8-16
user lockout-threshold command. For example:
8-15).
command is used to manually lock or unlock a user account. This command is
"Configuring the User Lockout Duration Time" on page
OmniSwitch AOS Release 6 Switch Management Guide
8-16) is reached or the admin user manually unlocks the
user lockout-duration
Managing Switch User Accounts
"Configur-
command. For example:
"Configur-
8-16) is
September 2009