Alcatel-Lucent OmniSwitch 6250 Management Manual page 315

SNMP Trap Information
No. Trap Name
21 pimNeighborLoss
pimNeighborIfIndex—The value of ifIndex for the interface used to reach this PIM neighbor.
24 risingAlarm
alarmIndex—An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnos-
tic sample at a particular interval for an object on the device.
alarmVariable—The object identifier of the particular variable to be sampled. Only variables that resolve to an
ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may
be sampled.
alarmSampleType—The method of sampling the selected variable and calculating the value to be compared
against the thresholds. If the value of this object is absoluteValue (1), the value of the selected variable will be
compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue
(2), the value of the selected variable at the last sample will be subtracted from the current value, and the differ-
ence compared with the thresholds.
alarmValue—The value of the statistic during the last sampling period. For example, if the sample type is
deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the
sample type is absoluteValue, this value will be the sampled value at the end of the period.
alarmRisingThreshold—A threshold for the sampled statistic. When the current sampled value is greater than
or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event
will be generated. A single event will also be generated if the first sample after this entry becomes valid is
greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm (1) or risin-
gOrFallingAlarm (3).
OmniSwitch 6250/6450 Switch Management Guide
Objects Family
pimNeigh- ipmr
borIfIndex
alarmIndex rmon
alarmVariable
alarmSample-
Type
alarmValue
alarmRisingTh-
reshold
May 2012
SNMP Traps Table
Description
Signifies the loss of adjacency
with a neighbor device. This trap
is generated when the neighbor
time expires and the switch has
no other neighbors on the same
interface with a lower IP address
than itself.
An Ethernet statistical variable
has exceeded its rising thresh-
old. The variable's rising thresh-
old and whether it will issue an
SNMP trap for this condition are
configured by an NMS station
running RMON.
page B-7