Alcatel-Lucent OmniSwitch 6250 Management Manual page 313

SNMP Trap Information
No. Trap Name
11 chassisTrapsStateChange
physicalIndex—The physical index of the involved object.
chassisTrapsObjectType—An enumerated value that provides the object type involved in the alert trap.
chassisTrapsObjectNumber—A number defining the order of the object in the set (e.g., the number of the
considered fan or power supply). This intends to clarify as much as possible the location of the failure or alert.
An instance of the appearance of the trap could be "failure on a module. Power supply 3".
chasEntPhysOperStatus—An enumerated value that indicates the operational status of installed modules
(includes empty slots).
12 chassisTrapsMacOverlap
physicalIndex—The physical index of the involved object.
chasTrapMacRangeIndex—The MAC range index of the involved object.
15 healthMonDeviceTrap
healthMonRxStatus—Rx threshold status indicating if threshold was crossed or no change.
healthMonRxTxStatus— RxTx threshold status indicating if threshold was crossed or no change.
healthMonMemoryStatus—Memory threshold status indicating if threshold was crossed or no change.
healthMonCpuStatus—CPU threshold status indicating if threshold was crossed or no change.
healthMonCmmTempStatus—CMM temperature threshold status indicating if threshold was crossed or no
change.
healthMonCmmCpuTempStatus—CMM CPU temperature threshold status indicating if threshold was
crossed or no change.
OmniSwitch 6250/6450 Switch Management Guide
Objects Family
physicalIndex chassis
chassisTrap-
sObjectType
chassisTrap-
sObjectNum-
ber
chasEntPhys-
OperStatus
physicalIndex module
chasTrapMac-
RangeIndex
healthMonRx- health
Status
healthMonRx-
TxStatus
healthMon-
MemorySta-
tus
healthMonC-
puStatus
healthMonCm-
mTempStatus
healthMonCm-
mCpuTemp-
Status
May 2012
SNMP Traps Table
Description
An NI status change was
detected.
A MAC range overlap was found
in the backplane eeprom.
Indicates a device-level threshold
was crossed.
page B-5