Alcatel-Lucent OmniSwitch 6250 Management Manual page 318

SNMP Traps Table
No. Trap Name
36 trapAbsorptionTrap
trapAbsorStamp—The time stamp of the absorbed trap.
trapAbsorTrapId—The trap identifier of the absorbed trap.
trapAbsorCounter—The number of the iterations of the absorbed trap.
trapAbsorTime—The time stamp of the last iteration.
37 alaStackMgrDuplicateSlotTrap
alaStackMgrSlotNINumber—The numbers allocated for the stack NIs are from 1 to 8.
38 alaStackMgrNeighborChangeTrap
alaStackMgrStackStatus—Indicates whether the stack is or is not in a loop.
alaStackMgrSlotNINumber—The numbers allocated for the stack NIs are from 1to 8.
alaStackMgrTrapLinkNumber—Holds the link number when the stack is not in a loop.
39 alaStackMgrRoleChangeTrap
alaStackMgrPrimary—Holds the number of the stack, which is in Primary role.
alaStackMgrSecondary—Holds the number of the stack, which is in Secondary role.
page B-10
Objects Family
trapAbsorStamp none
trapAbsor-
TrapId
trapAbsor-
Counter
trapAbsorTime
alaStack- chassis
MgrSlotNI-
Number
alaStack- chassis
MgrStackSta-
tus
alaStack-
MgrSlotNI-
Number
alaStackMgr-
Tra-
pLinkNumber
alaStackMgrPri- chassis
mary
alaStackMgr-
Secondary
OmniSwitch 6250/6450 Switch Management Guide
SNMP Trap Information
Description
The absorption trap is sent when
a trap has been absorbed at least
once.
Two or more slots claim to have
the same slot number.
Indicates whether or not the stack
is in loop.
Indicates that a new primary or
secondary stack is elected.
May 2012