Jensen VM9725BT Operating Instructions Manual page 63

VM9725BT
Hands Free Profile (HFP)
To use a mobile phone with this unit, it is necessary to first establish a connection
using Bluetooth® wireless technology. The connection is normally established
using Hands Free Profile (HFP), which gives you full control of functions available
on the mobile phone source. However, depending on your mobile phone, the
connection may be made using Head Set Profile (HSP), making some functions
unavailable. This is a limitation of your mobile phone, not theVM9725BT.
Since there are a number of Bluetooth® mobile phone implementations available
on the market, operations with your Bluetooth® mobile phone using this unit vary
greatly.
Please refer to the instruction manual that came with your Bluetooth® mobile
phone along with this manual while operating your mobile phone with this unit.
Pairing the Your Mobile Phone with the Head Unit
Your mobile phone can initiate a search for new devices and pair to the unit. The
following paragraphs describes the pairing process.
NOTE: The following procedures are generic. Procedures for pairing mobile phones
may vary slightly from mobile phone manufacturer to mobile phone manufacturer.
1. Press the SRC button on the front panel to access the Source Menu.
2. Touch the BT (Bluetooth) icon. The following screen will appear:
3. Set the Bluetooth function to ON.
4. Set the Auto Connect function to ON.
5. Access the mobile phone Bluetooth® function and set the function to ON.
6. Set the mobile phone Bluetooth® discover mode to ON.
NOTE: Some discovery modes have a time limit usually a minute before they are
automatically turned off.
7. Use the mobile phone's add a new device feature. A device or devices will
appear on your mobile phone display.
63