Jensen VM9725BT Operating Instructions Manual page 226

VM9725BT
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This is the
orientation for example in Find on Map. See also: Track-up map orientation.
Road Safety Camera
Special alert points for speed, red light or bus lane cameras. Different data sources
are available. You can configure iGo primo to warn you when you approach one of
these cameras.
Detecting the location of Road Safety Cameras is prohibited in certain countries.
It is the sole responsibility of the driver to check whether this feature can be used
during the trip.
Route
A sequence of route events, i.e. maneuvers (for example, turns and traffic circles)
to reach the destination. The route contains one start point and one or more
destinations. The start point is the current (or last known) position by default.
If you need to see a future route, the start point can be replaced with any other
given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the current driving
direction. This is the default orientation in 3D map view mode. See also: North-up
map orientation.
Vehimarker
The current position is shown with a red arrow on the map by default. The
direction of the red arrow shows the current heading. This position marker can
be replaced with different vehicle and pedestrian symbols. You can even specify
different Vehimarkers for different route types (depending on which vehicle type
is selected for route calculation).
134