Setting A New Starting Position For The Route - Jensen VM9725BT Operating Instructions Manual

Setting a New Starting Position for the Route

For normal navigation, all routes are planned from the current position. In order
to check future routes, simulate them or see their length in time and distance, you
can turn off the GPS receiver. Then you can set the starting point of the route to a
different location than the current GPS position.
1. If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
3. If you already have a route, tap
If you are starting a new route, tap
94
VM9725BT
to return to the
.
.
.