Jensen VM9725BT Operating Instructions Manual page 123

VM9725BT
Elements of the Active Route
iGO primo shows the route in the following way:
Symbol Name
Current GPS position
and Start point
Waypoint (intermediate
destination)
Destination (end point)
Route color
Streets and roads that
are excluded from the
navigation
Streets and roads that
are affected by traffic
events
Description
Your current position displayed on the
map.
• In pedestrian mode it is the exact
GPS position.
• If a vehicle is selected for route
calculation and roads are near, the
symbol is snapped onto the nearest
road.
Normally if GPS position is available,
the route starts from the current
position. If there is no valid GPS
position, iGO primo uses the last
known position as the start point.
An intermediate destination of
the route before reaching the final
destination.
The final destination of the route.
The route always stands out with its
color on the map, both in daytime and
in night color mode.
You can choose whether you want
to use or avoid certain road types.
However, when iGO primo cannot
avoid such roads, the route will include
them and it will show them in a color
that is different from the route color.
Road segments may be affected by
traffic events received. These streets
and roads are displayed in an alternate
color, and small symbols displayed
along the route show the type of the
traffic event.
31